AGC Automotive Americas Asks NHTSA for Exemption of FMVSS Compliance on Certain Backlites

September 16, 2014

The National Highway Traffic Safety Administration (NHTSA) has received a petition from AGC Flat Glass North America, doing business as AGC Automotive Americas Co., asking for Decision of Inconsequential Noncompliance over certain glazing the company manufactured as replacement automotive backlites for model-year 2003-2008 Toyota Matrix vehicles. AGC officials say the backlites do not fully comply with S5.1 and S5.7 of the Federal Motor Vehicle Safety Standard No. 205, Glazing Materials.

This entry was posted in Safety News. Bookmark the permalink.

Auto Glass Safety Council Guidelines for Usage of Associate Member Logo

Logo can be used in only black and white or in black and process yellow.
Logo must not be changed or reproportioned.
Logo must be used with a trademark symbol (™).
Logo can be used in any size.
Logo can only be used by current AGSC Associate Members.
Usage is permitted only while a company's membership is in good standing with AGSC.
Logo must be used as is when identified in advertising. It should not be commercialized. Use of the logo in any advertisements should be approved by AGSC prior to usage. (Email Kathy Bimber at kbimber@agsc.org prior to usage.)
When used on websites, logo shoul link to the AGSC website at www.agsc.org.
Logo may not be reproduced on or in connection with any materials or product without the prior express written consent of the AGSC.
Logo may not be used on any material in poor taste.
The AGSC can assist you in evaluating your proposed logo usage prior to use.

As a condition of membership, I agree to follow the guidelines listed above on the usage of the AGSC Associate Member logo.

I do not agree with the guidelines listed above and decline usage of the logos.

Auto Glass Safety Council Guidelines for Usage of Registered Member Company Logo

Logo can be used in only black and white or in black and process yellow.
Logo must not be changed or reproportioned.
Logo must be used with a trademark symbol (™).
Logo can be used in any size.
Logo can only be used by current AGSC Registered Member Companies.
Usage is permitted only while a company's membership is in good standing with AGSC.
Logo must be used as is in advertising. It should not be commercialized. Use of the logo in any advertisements must be approved by AGSC prior to usage. (Email Kathy Bimber at kbimber@agsc.org prior to usage.)
When used on websites, logo should link to the AGSC website at www.agsc.org.
Logo may not be reproduced on or in connection with any materials or product without the prior express written consent of the AGSC.
Logo may not be used in connection with any material in poor taste.
The AGSC can assist you in evaluating your proposed logo usage prior to use.

As a condition of membership, I agree to follow the guidelines listed above on the usage of the AGSC Registered Member Company logo.

I do not agree with the guidelines listed above and decline usage of the logos.

Auto Glass Safety Council Guidelines for Usage of Registered Training Program Logo

Logo can be used in black and white or in black and process yellow.
Logo must not be changed or reproportioned.
Logo must be used with a trademark symbol (™).
Logo can be used in any size.
Logo can only be used by current AGSC Registered Training Programs.
Usage is permitted only while a company's membership is in good standing with AGSC.
Logo must be used as is in advertising. It should not be commercialized. Use of the logo in any advertisements must be approved by AGSC prior to usage. (Email Kathy Bimber at kbimber@agsc.org prior to usage.)
When used on websites, logo should link to the AGSC website at www.agsc.org.
Logo may not be reproduced on or in connection with any materials or product without the prior express written consent of AGSC.
Logo may not be used in connection with any material in poor taste.
The AGSC can assist you in evaluating your proposed logo usage prior to use.

As a condition of membership, I agree to follow the guidelines listed above on the usage of the AGSC Registered Training Program logo.

I do not agree with the guidelines listed above and decline usage of the logos.

Auto Glass Safety Council Guidelines for Usage of Automotive Casualty Insurance Company Member Logo

Logo can be used in black and white or in black and process yellow.
Logo must not be changed or reproportioned.
Logo must be used with a trademark symbol (™).
Logo can be used in any size.
Logo can only be used by current AGSC Automotive Casualty Insurance Company Members.
Usage is permitted only while a company's membership is in good standing with AGSC.
Logo must be used as is in advertising. It should not be commercialized. Use of the logo in any advertisements must be approved by AGSC prior to usage. (Email Kathy Bimber at kbimber@agsc.org prior to usage.)
When used on websites, logo should link to the AGSC website at www.agsc.org.
Logo may not be reproduced on or in connection with any materials or product without the prior express written consent of AGSC.
Logo may not be used in connection with any material in poor taste.
The AGSC can assist you in evaluating your proposed logo usage prior to use.

As a condition of membership, I agree to follow the guidelines listed above on the usage of the AGSC Automotive Casualty Insurance Company Member logo.

I do not agree with the guidelines listed above and decline usage of the logos.

AGC Automotive Americas Asks NHTSA for Exemption of FMVSS Compliance on Certain Backlites

September 16, 2014

Leave a Reply Cancel reply

Auto Glass Safety Council Guidelines for Usage of Associate Member Logo

Auto Glass Safety Council Guidelines for Usage of Registered Member Company Logo

Auto Glass Safety Council Guidelines for Usage of Registered Training Program Logo

Auto Glass Safety Council Guidelines for Usage of Automotive Casualty Insurance Company Member Logo